The Pusher 3.5" Mega Intake System with Cross-Air replaces all of your 3” factory post intercooler plumbing and intake manifold with 3.5” mandrel bend tubing, top quality 4-ply silicone couplers and stainless T-clamps.
The Cross-Air adapts to an existing port at the rear of the intake plenum that is normally sealed off with a freeze plug style fitting from the factory. By splitting off the driver-side charge tube and creating another parallel path to that port, cylinders 5, and 6 can be better supplied with air.
This helps balance the engine temperatures and load at each cylinder greatly. This helps balance the engine temperatures and load greatly.
This entire package is fully TIG welded mandrel bent tubing, with a laser cut 1/2" flange and 1/4" dipstick mount.
The intake manifold is standard equipped with four 1/8 inch NPT ports on the back for methanol/water injection, a boost gauge, etc.
This is a complete kit that includes instructions, a machined cylinder head adapter, heavy duty 4-ply silicone couplers, stainless T-bolt clamps, a OEM gasket and hardware, and 1/8 inch port plugs for a quality install.
For an additional charge, select powdercoating colors are available on this kit.