98-02 Cummins 5.9 Pusher Intakes Cross Air

FEATURES
The Pusher 3" Cross-Air works with the factory intake manifold or any factory replacement manifold and is the most cost effective way to protect your rear cylinders on trucks under the 500HP mark.

The Cross-Air adapts to an existing port at the rear of the intake plenum that is normally sealed off with a freeze plug style fitting from the factory.

By splitting off the driver-side charge tube and creating another parallel path to that port, cylinders 5, and 6 can be better supplied with air. This helps balance the engine temperatures and load at each cylinder greatly.

This entire package is fully TIG welded mandrel bent tubing and includes instructions, a machined cylinder head adapter, heavy duty 4-ply silicone couplers, stainless T-bolt clamps and hardware for a quality install.

For an additional charge, select  powdercoating  colors are available on this kit.