13-18 Ram Cummins 6.7 RPI 5" Cold Air Intake System

This is our 5" Cold Air Intake system for 13-18 Ram Cummins 6.7 this is the biggest system on the market! 

**Cummins Logo on heat sheild is a custom logo, If you do not choose the custom logo option the heat shield logo will be RPI **

***This system should have custom tuning for MAF sensor calibration. Meaning with ez lynk, efi live, or mm3 tuning you will need to have your tuner re-scale the MAF sensor for the 5" tube so that the truck fuels the way it should with the bigger intake.*** If you do not have Custom tuning to be able to re-scale the MAF sensor, than our 4" version will be what you need, in fact the 4" will run better and make more power than the 5" would on a truck without the custom tuning. It is the same MAF tuning as you would use for a 2nd gen S400 Turbo Swap.

This system uses a huge 5 Inch T6 Aluminum intake tube for ultimate air flow!

**Click here to view available powder coating colors. **

You will have faster spool up, lower egt's, Noticeable Horsepower gain, some Mpg gain, and a turbo whistle that will make people look when your going through town!

Has a bolt in heat shield that is very well sealed to keep underhood temps away from the Filter, it provides a fresh cold air supply straight to the filter for lower egt's and better performance. It is normal to see 150-250 deg drop in egt's with this system.

We use only the best filters on all our intake systems

These are Custom built to order, normally takes 14-21 days to ship out.

 

Cannot ship to California